WeBonsai
WeBonsai Formula

An insulated rock for ishizuki bonsai

Every WeBonsai rock is a one-off, made by hand around a light, insulating core that slows heat moving through the rock. Outside is a tough shell of fibre-reinforced composite, shaped and textured to look like real stone. We make them for ishizuki, where the tree grows on the rock itself.

The figures on this page are standard conduction and weight calculations using typical material values. A finished rock has outer layers and varying thickness, so its real behaviour will differ from the layer figures.

Insulation, material by material

Insulation is the main reason we built the WeBonsai Formula. Here is how strongly each material resists heat crossing a 30 mm layer, using standard conduction values.

WeBonsai insulating layer
100%
Insulation
compared with the WeBonsai layer
Conductivity
0.030 W/m·K
Insulation value R (30 mm)
1.00 m²K/W
Heat crossing (ΔT 20°C)
20 W/m²
Solid cement
3%
Insulation
compared with the WeBonsai layer
Conductivity
1.0 W/m·K
Insulation value R (30 mm)
0.030 m²K/W
Heat crossing (ΔT 20°C)
667 W/m²
Solid epoxy
9%
Insulation
compared with the WeBonsai layer
Conductivity
0.35 W/m·K
Insulation value R (30 mm)
0.086 m²K/W
Heat crossing (ΔT 20°C)
233 W/m²

How thick a wall gives the same insulation

To insulate as well as 3 cm of the WeBonsai insulating layer, you would need a wall this thick:

WeBonsai insulating layer
3 cm
Solid cement
100 cm
Solid epoxy
35 cm

Figures for the insulating layer alone: one-dimensional, steady-state conduction through 30 mm with a 20°C difference. A finished rock has outer layers and varying thickness, so it behaves differently, and none of this predicts root temperature.

Temperature and weight, explained

Pick a tab. Each one takes a single idea and shows how the three materials compare.

On a hot day

With the air at 35°C and strong sun, the surface of any dark rock can reach 45–55°C. That is true of all three materials.

What differs is what happens next. The insulated sections of a WeBonsai rock slow the heat working its way in towards the planting pocket. Exposed soil still heats up in direct sun, so shade, substrate and watering matter just as much.

Surface in strong sun
WeBonsai FormulaHot
Solid cementHot
Solid epoxyHot
Heat moving inward
WeBonsai FormulaSlower
Solid cementFaster
Solid epoxyMedium

Three materials side by side

We compare the WeBonsai Formula with a rock cast solid in cement and one cast solid in epoxy resin.

WeBonsai FormulaSolid cementSolid epoxy
ConstructionLight insulating core inside a reinforced shellDense mineral bodyDense cast polymer
Heat moving through the bodyLowestHighestLower than cement
Response to temperature swingsSlows heat transferConducts heat readily and stores a lot of itModerate conduction, stores less than cement
Weight to handleMuch lighterHeavyIn between

At a glance

WeBonsai FormulaSolid cementSolid epoxy
Insulation through the rock bodyHighestLowestMedium
Heat stored during the dayLowHighMedium
Lifting and shippingEasiestHardestIn between

Made to be handled

A lighter rock lets you attempt a bigger ishizuki composition without the lifting a solid stone that size would demand.

The body is designed to slow temperature changes, but healthy roots still depend on planting depth, the amount of substrate, drainage, exposure and watering.

The WeBonsai Formula is our own. We don't publish the individual materials or production steps.

How we worked out the figures

  • Insulation: thermal resistance R is thickness ÷ conductivity, and heat flow is temperature difference ÷ R. We used 0.030 W/m·K for the insulating layer, 0.35 for epoxy and 1.0 for cement, over 30 mm with a 20°C difference. That gives R values of 1.00, 0.086 and 0.030 m²K/W, and heat flows of 20, 233 and 667 W/m².
  • Equivalent wall: the thickness of each material with the same R as 3 cm of the insulating layer, R × conductivity. That is 35 cm of epoxy and 100 cm of cement.
  • Weight: 30 litres × material density. We used 2,100 kg/m³ for cement and 1,150 kg/m³ for epoxy, both typical values. The 7.5 kg WeBonsai figure is a plausible total for a light composite of that size, not a number calculated from our layer geometry.

Reference values

Our ishizuki rocks

See the rocks we have in stock and pick one for your next composition.

See the rocks in the shop